Changing Or Canceling Vcr Timer Settings (Timer List) - Sony RDR-VX555 Operating Instructions Manual

Notes
• The recorder starts recording only after detecting the
video signal from the connected equipment. The
beginning of the program may not be recorded
regardless of whether or not the recorder's power is on
or off.
• To use the connected equipment during Synchro-Rec
standby, cancel the standby mode by pressing
SYNCHRO REC. To return to standby mode again, be
sure to turn off the equipment and press SYNCHRO
REC, before Synchro-Rec starts.
• The Synchro-Rec function does not work with some
tuners. For details, see the tuner's operating
instructions.
• After a recording has finished, the recorder enters the
Synchro-Rec standby mode until the SYNCHRO REC
indicator turns off.
• You cannot record on a tape with its safety tab
removed.
• If Synchro-Rec starts with the recorder turned on, the
recorder will turn off when the recording ends.
Changing or Canceling VCR
Timer Settings (Timer List)
You can change or cancel timer settings using the
Timer List menu.
1 1 2 2
4 4 5 5
7 7 8 8
0 0
SYSTEM
MENU
O RETURN
1
Press SYSTEM MENU.
The System Menu appears.
2
Select "Timer," and press ENTER.
3
Select "Timer List," and press ENTER.
Timer List
No. Media Date Start
01 VCR 04/15 09:00PM
02 VCR 04/30 09:15PM
03 --- --/-- --:--
04 --- --/-- --:--
05 --- --/-- --:--
06 --- --/-- --:--
Timer information displays the recording
date, time, recording mode, etc.
If there are more than six timer settings, press
m to display the next page.
3 3
6 6
9 9
M/m/</,,
ENTER
10:10 AM
End Ch Mode Edit
10:00PM Line1 SP
09:45PM Line1 SP
--:-- ---- ---
--:-- ---- ---
--:-- ---- ---
--:-- ---- ---
,continued 81