Vcr Recording From Connected Equipment Without The Timer - Sony RDR-VX555 Operating Instructions Manual

VCR Recording From
Connected Equipment
Without the Timer
You can record TV programs on the recorder
through the connected cable box/satellite receiver.
DVD
DISPLAY
z REC
1
Turn on the recorder and the connected
cable box/satellite receiver.
2
Press VIDEO to operate the VCR.
3
Insert a tape with its safety tab in place.
4
Press CH +/– or INPUT repeatedly to select
the channel or input source you want to
record.
• When using the cable box/satellite receiver
control, select the channel by pressing
CH +/– on this recorder's remote. The
recorder's input is switched to the connected
input (LINE1 or LINE2). You can also use
the number buttons.
• When not using the cable box/satellite
receiver control, select the connected input
76
VIDEO
1 1 2 2 3 3
CH +/–
4 4 5 5 6 6
INPUT
7 7 8 8 9 9
0 0
H PLAY
x STOP
X PAUSE
REC MODE
(LINE1 or LINE2) by pressing INPUT, and
then select the channel on the cable box/
satellite receiver's side.
5
Press REC MODE repeatedly to select the
recording mode, "SP" or "EP."
For details about the recording mode, see
page 75.
6
Press z REC.
"REC" appears in the front panel display, and
recording starts.
Leave the cable box/satellite receiver turned
on and do not change the channel you are
recording.
To stop recording
Press x STOP.
To pause recording
Press X PAUSE.
To restart recording, press X PAUSE again.
If you pause recording for more than five minutes,
recording stops automatically.
To watch a DVD while recording
Press DVD to operate the DVD recorder, insert a
disc, and press H PLAY.
z Hints
• Tape information displayed on the TV screen will not
be recorded on the tape.
• You can turn off the TV during recording.
Notes
• You cannot change the recording mode or input source
while recording.
• If you insert a tape with its safety tab removed, the tape
is ejected when you press z REC.
Recording using the Quick Timer
(One-touch Timer Recording)
You can set the recorder to record in 30-minute
increments.
1
Press VIDEO to operate the VCR.
2
Press z REC repeatedly to set the
duration.
Each press increases the time by 30 minutes,
up to six hours.
0:30 1:00
(Normal
5:30 6:00
recording)