Related Manuals for CMP 25504-600-00
Summary of Contents for CMP 25504-600-00
- Page 1 ® WATER FEATURE FILTER INSTALLATION INSTRUCTIONS & PRODUCT MANUAL CMP 25504-600-000...
- Page 2 A. LOCATION OF FILTER AND PUMP SELECTION 1. If filter is installed above the waterline, use self-priming pump. 2. Position Filter as close to pool as local codes allow. 3. Ensure filter is set on level concrete slab. 4. Make sure pressure gauge and label are oriented for convenient access and viewing 5.
- Page 3 Hole in cover is already pre-tapped. Apply PTFE (Teflon®) tape to pressure gauge threads and screw gauge into threads on cover. 2. CMP recommends 1 gallon per minute (gpm) per square foot of filter for proper filtration. a. 50 sq ft filter = 50 gpm b.
- Page 4 Rinse thoroughly before re-installing the filter in the filter body. H. ADDITIONAL NOTES 1. This CMP Water Feature Filter is not designed to be the main source of filtration. 2. The pressure gauge is the primary indicator as to how the filter is functioning. Maintain the pressure gauge in good working order and replace if necessary.
Need help?
Do you have a question about the 25504-600-00 and is the answer not in the manual?
Questions and answers