KAM TRI 160 Instruction Manual

G Setting DIP SWITCH NO.1 & NO.10 in "ON", theTRI 160 LASER can be
control by DMX controller.
G When using a DMX controller, the mini-controller function is no
available. When using the mini-controller, the DMX function is not
available.
G Linkable laser to master & slave by DMX control, Master & slave DIP
SWITCH setting to No.1 & NO.10 in "ON", then all lasers will show same
patterns work together in sync.
G Linkable laser to master & slave by DMX control, Master laser DIP
SWITCH setting to No.1 & NO.10 in "ON", slave lasers DIP SWITCH
setting will follow laser function DMX channels binary number to setting
in different switch number in each unit. Then all lasers will show
different patterns by DMX controller setting program to work.
G When not using DMX controller to control laser light, the DIP SWITCH
No.10 in "ON", then the laser light will be in sound activated mode
When not using a DMX controller to control laser light, the DIP SWITCH
No.1 in "ON", then the laser light will be in automatic mode
G When not using a DMX controller to control laser light, for linking , the
Master DIP SWITCH No.1 in "ON", Slave No.2 in "ON", the laser will be is
automatic mode.
G When not using a controller to control laser light, the laser light will be
in automatic and sound active mode. The laser light can be linked in
master and slave mode . set DIP SWITCH as follows:
Master DIP SWITCH address: From NO.1 to NO.10 in "OFF".
All slave DIP SWITCH address: NO.2 in "ON".
G The Tri 160 laser is designed with a black out function.
When there is no sound to active The Tri 160 laser the laser will go into
black out mode. And when sensitivity is set to low the laser will go into
black out mode.
Technical Specification
Operation Voltage: AC 220V~240V/50Hz
Working power: 15W
Laser Wavelength: 532nm, 650nm
Laser power: 532nm/30mW +650nm/100mW
Laser class: Class IIIb
Fuse: 3A F
Channels: 10 channels
Control signal: DMX512 signal
Control mode: DMX/Sound active/Automatic
Net weight: 5.00Kg
Light body Dimensions: 400x230x120mm
Attention: The laser light is designed only for use indoors
Operating temperature is 10°~ 60°C.
Due to continuous product development, specifications
and appearance are subject to change. E&O E.
K A M T R I 1 6 0 L A S E R
K A M K S M 1 1 0 0
K A M T R I 1 6 0 L A S E R
i n s t r u c t i o n
w w w . k a m . c o . u k
m a n u a l