Setting Up The Guide Plus+ ® System/Set Top Box Controller - Sony RDR-HX750 Operating Instructions Manual

Progressive
When you connect a progressive format
TV to this recorder using the
COMPONENT VIDEO OUT jacks,
select "Compatible."
HDD caution messages
Read the HDD caution messages, and
press ENTER.
4
Select "Finish Setup" using M/m, and
press ENTER.
"Easy Setup" is completed.
To return to the previous step
Press O RETURN.
z Hint
If you want to run "Easy Setup" again, select "Easy
Setup" in the "Basic" setup from "Initial Setup" in
the System Menu (page 110).
Setting up the GUIDE Plus+
system/set top box controller
Follow the steps below to set up the GUIDE
Plus+ system and set top box controller. The
GUIDE Plus+ system is available in the UK
only.
1
Press GUIDE.
The GUIDE Plus+ system "Basic Setup"
appears.
For users other than in the UK, go to
step 4.
24
2
Select "Postal Code," and press
ENTER.
3
Enter your postal code using </M/m/
,, and press ENTER.
If "Country" is set to "Others," you
cannot enter a postal code and the
GUIDE Plus+ system will not search for
a host channel.
4
Select "External Receiver 1," and
press ENTER.
You can also select "External Receiver
2" or "External Receiver 3" if you have
connected additional set top box
receivers.
5
Press ENTER to select "Continue."
6
Select the set top box receiver type
using M/m, and press ENTER.
7
Select the provider using M/m, and
press ENTER.
®
8
Select the receiver brand using M/m,
and press ENTER.
If you select "Other providers," you can
select a receiver brand from a list of all
available brands.
If your receiver brand is not on the list,
select "???."
The receiver brand list is automatically
updated, so your receiver may be
available at a later date. Select your brand
when it becomes available. Until then,
use "???."
9
Select the connection you used for
your set top box receiver using M/m,
and press ENTER.
When the set top box receiver is
connected to the recorder using hookup
A with both an aerial cable and a SCART
cord, select either "Line1" or "Antenna."
The display asks for confirmation.
10
Press ENTER to select "Continue."
The Video Window switches to the
specified programme position.