Sony RDR-HX510 Operating Instructions Manual page 94

b
Note
If you set the recording mode to be changed while
dubbing from a DVD to the HDD, the sound recorded in
the source (DVD) is applied regardless of this setting.
DVD Bilingual Rec. (for all recordable discs
except DVD-RW in VR mode)
Selects the sound to be recorded on the recordable
disc. This setting is not necessary when recording
on DVD-RWs (VR mode) that record both the
main and sub sounds.
Main Records the main sound for the
bilingual programme.
Sub Records the sub sound for the
bilingual programme.
Dimmer
Adjusts the lighting of the front panel display.
Normal Bright lighting.
Power
Low lighting. Turns off the
Save lighting when the power is off.
b
Note
When "Power Save" in "Options" setup is set to "On,"
the front panel display is turned off during standby
regardless of this setting.
Power Save
Selects whether this recorder is in power save
mode when the power is turned off (standby).
On Sets to power save mode. The
front panel display is off when the
recorder is in standby.
Off Does not set to power save mode.
Normally, select this.
b
Notes
• Power Save mode does not function in the following
cases, even when "Power Save" is set to "On
– Synchro Recording is set.
– there is a timer setting with "PDC/VPS" set to "On"
in the Timer List.
• The SMARTLINK features are not available when
"Power Save" is set to "On
94
.
"
.
"
Auto Display
On Automatically displays
information on the screen when
the recorder is turned on, etc.
Off
Displays information only when
DISPLAY is pressed.
Command Mode
Changes the Command Mode of the recorder if
other DVD equipment is assigned the same
Command Mode. Be sure to match the Command
Mode switch on the remote to the setting made
here. For details, see "If you have a Sony DVD
player or more than one Sony DVD recorder" on
page 21.
DVD1
Select this if the default Command
Mode conflicts with other DVD
equipment.
DVD2 Select this if the default Command
Mode conflicts with other DVD
equipment.
DVD3
The default Command Mode of
the recorder.
Factory Setup
Allows you to select the setup settings by group,
and return them to their default settings. Note that
all of your previous settings will be lost.
1
Select "Factory Setup" in "Options," and
press , or ENTER.
The display for selecting a group of settings
appears.
2
Select the group of settings you want to return
to default from "Settings," "Video," "Audio,"
"Features," "Options," "Parental Control,"
and "All," and press , or ENTER.
3
Select "Start," and press ENTER.
The selected settings return to their default
settings.
4
Press ENTER when "Finish" appears.