Advertisement
Step 1: Connect to your Device
Get one MoCA Network Adapter.
a
Locate the device or access point (laptop, etc.) that
b
needs to connect to the Internet. Connect one Ethernet
Cable from the Network Adapter to the Device.
Connect one Splitter to the Coax Cable coming from
c
the Coax Outlet on the wall.
Connect one Coax Cable from the Splitter to the Coax
d
In port on the Network Adapter.
Connect one Power Adapter to the Network Adapter
e
and to a Power Outlet.
Wait until the Power light on the front of the adapter
f
is
GREEN.
IMPORTANT! If the Coax LED on the Network Adapter
g
is already GREEN, you may have MoCA built in to your
modem/router. Check the device you just connected. If
it is connected to the Internet, you're done*. If the device
does not connect to the Internet, continue to Step 2.
*
You may use the 2nd adapter with another device or access point.
TV
MoCA Network
a
Adapter (1)
d
Splitter
f
Power LED
Coax
c
Outlet
(Coaxial wiring behind the wall)
Laptop or other
access point
Power
Outlet
b
g
Coax LED
e
Step 2 : Connect to your Modem/Router
Get one MoCA Network Adapter.
a
Connect one Ethernet Cable from the Network
b
Adapter to the Modem/Router.
Connect one Splitter to the Coax Cable coming from
c
the Coax Outlet on the wall.
Connect one Coax Cable from the Splitter to the Coax
d
In port on the Network Adapter.
Note: If you have a TV or set top box near your modem/router,
connect a coax cable from the splitter to the TV or set top box.
Actiontec does NOT recommend using the TV/STB Out port.
Connect the second Power Adapter to the Network
e
Adapter and to a Power Outlet.
Wait until the Power light on the front of the adapter
f
is
g
When the Coax LED is
adapters are working.
Power
Adapter
Coax
Outlet
GREEN.
GREEN
TV
a
d
Splitter
f
Power LED
c
on both adapters, your
b
MoCA Network
Adapter (2)
Power
Outlet
g
Coax LED
Power
e
Adapter
Advertisement
