Sony RDR-GX120 Operating Instructions Manual page 63

b
Notes
• If your TV does not accept S-video or RGB
signals, no picture appears on the TV screen even
if you select "S Video" or "RGB." See the
instructions supplied with your TV.
• You cannot select "RGB" when "Component
Out" above is set to "On."
• SMARTLINK is available only when "Video" is
selected.
Line3 Input
Selects a method of inputting video signals
for the LINE 3/DECODER jack. The picture
will not be clear if this setting does not match
the type of video input signal.
Video/
Inputs video signals or RGB
RGB signals.
Decoder
Select this when connecting
to a PAY-TV/Canal Plus
analogue decoder. If you
connect to a cable box/
satellite receiver such as
CanalSat, do not select this
option.
S Video Inputs S-video signals.
b
Note
RGB signals cannot be recorded when "Video/
RGB" is selected.
Line3 Output
Selects a method of outputting video signals
for the LINE 3/DECODER jack.
Video
Outputs video signals.
S Video Outputs S-video signals.
Pause Mode (DVDs only)
Selects the picture quality in pause mode.
Auto The picture, including
subjects that move
dynamically, is output with
no jitter. Normally select this
position.
Frame The picture, including
subjects that do not move
dynamically, is output in high
resolution.
Colour System
Selects the colour system when playing
VIDEO CDs (including Super VIDEO CDs).
PAL Plays a disc in PAL colour
system.
NTSC Plays a disc in NTSC colour
system.
Auto Display
On Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off Displays information only
when DISPLAY is pressed.
Screen Saver
The screen saver image appears when you do
not use the recorder for more than 10 minutes
while an on-screen display, such as the
System Menu, is displayed on your TV
screen. The screen saver image helps prevent
your display device from becoming damaged
(ghosting).
On Turns on the screen saver
function.
Off Turns off the function.
63