To Release A Group Setting - Sony MZ-N505 OpenMG Jukebox NOTES on installing & operating Operating Instructions Manual

./>
1
While the recorder is stopped, press
MENU.
2
Press . or > repeatedly until
"EDIT" flashes in the display, and
then press ENTER.
3
Press . or > repeatedly until
"G:Set" flashes in the display, and
then press ENTER.
The track number of the first track
("STR") appears in the display.
4
Press . or > repeatedly until
the number or name of the desired
first track flashes in the display, and
then press ENTER.
This selects the first track of the new
group.
Even when group mode is on, track
numbers appear according to their
order on the disc, not their order
within the group.
40
-GB
MENU/ENTER
GROUP
5
Press . or > repeatedly until
the number or name of the desired
last track flashes in the display, and
then press ENTER.
The track number of the last track in
the group ("END") appears in the
display.
This selects the last track of the new
group.
6
Follow steps 4 to 7 of "Labeling
recordings" (page 38) to label a
group.
Notes
• In step 4, the first track must either be the first
track of an existing group or a track that does
not belong to a group.
• When selecting the last track in step 5, make
sure the track comes after the one selected in
step 4. The last track must either be the last
track of an existing group or a track that does
not belong to a group.
To release a group
setting
• Insert a disc with group settings.
MENU/ENTER
./>/
x
1
Press GROUP for 2 seconds or more
to turn on group mode.
2
Select a group that you want to
release and check the contents (see
"Selecting and playing groups (Group
Skip Mode)" (page 33)).
3
Press x.
GROUP