Table of Contents
Advertisement
Handmate UV 600 v. 2.4
4.1 STARTING THE JOB
Press the ON button
The indicator will burn
On the display of the handunit the tekst DONE will appear.
Press
the
button
with
the
"lamp
symbol"
On the display of the lamp unit the text WAIT will be shown
As soon as the lamp is warm, the text DIM will be shown
in the display.
DISTANCE BETWEEN LAMPUNIT AND SURFACE: 2 –
4 CENTIMETERS
Use the button on the lampunit or the extension handle to
open the shutter and to start UV curing. The text FULL will
be shown on the display.
DIST = distance to surface is not correct, a beeping signal
can be heard.
On the bottom of the lamp unit a shutter will slide in front
of the UV bulb, UV curing is not possible any longer.
Move the lamp unit in a position between 2 – 4 centimeters
from the surface. DIM will be shown on the display. The
lamp can go to FULL and curing can be started again.
13
Advertisement
Table of Contents
