Related Manuals for DecoRad Handmate UV 600
Summary of Contents for DecoRad Handmate UV 600
-
Page 1: User Manual
Handmate UV 600 v. 2.5 User Manual DecoRad® Handmate UV 600 DecoRad® Systems bv Kruisboog 39B 3905 TE Veenendaal Nederland Tel.: +31(0)318-550425 E-mail: info@decorad.com www.decorad.com... -
Page 2: Preface
UV has been used successfully for many years already for instantly curing inks, car paints, glues and coatings. The DecoRad® Handmate UV 600 is the result of the many years' experience of DecoRad® Systems with on-site use of UV in combination with coatings, varnishes and oils. -
Page 3: Table Of Contents
Handmate UV 600 v. 2.5 Contents User Manual DecoRad® Handmate UV-600 Preface Contents Introduction Manufacturer CE-Marking Guarantee Copyright Liability Safety Safety symbols in this user manual Symbols on the DecoRad® Handmate UV-600 Usage Maintenance Safety regulations UV-radiation Risks of UV-radiation... -
Page 4: Introduction
For any questions regarding sales orders, deliveries, parts or shipments, please contact DecoRad® Systems bv. 1.2 CE-marking The DecoRad® Handmate UV 600 comes with a CE marking. This means that the Handmate meets the fundamental safety directive of the European Community. -
Page 5: Guarantee
The manufacturer of the DecoRad® Handmate UV 600 provides a 12 month warranty (carry-in) for parts and repair costs*. This warranty is only valid if the DecoRad® Handmate UV 600 is used according to the specifications and the user- and maintenance instructions are observed. -
Page 6: Safety
Handmate UV 600 v. 2.5 2. Safety This chapter describes the safety measures pertaining to the DecoRad® Handmate UV 600. Carefully read this chapter before putting the DecoRad® Handmate UV 600 into operation or performing maintenance work. 2.1 Safety symbols in this user manual The following symbols are used in this user manual: A comment draws the user's attention to possible problems. -
Page 7: Usage
- UV lamps (dirt causes a decrease in UV yield, the number of burning-hours >500) - Reflector: yield 1. Energy / 2. Output 2.5 Safety regulations The DecoRad® Handmate UV 600 meets the fundamental safety and health directive of the relevant guidelines of the European Community. Stay alert for dangerous situations! 2.6 UV radiation... -
Page 8: Risks Of Uv-Radiation
Handmate UV 600 v. 2.5 Most of the UV radiation we get comes through sunlight. Not all UV radiation reaches the earth: a part is blocked by the ozone layer. 2.7 Risks of UV radiation Both UVA and UVB can damage cells and genetic material, thus leading to skin cancer. UVB poses the greater risk here. -
Page 9: User
Please make sure that bystanders without appropriate UV protection are at a safe distance of 6 meters / 20 ft In order to prevent damage to the DecoRad® Handmate UV 600 and the user, the user is strictly prohibited to work with tools on the DecoRad® Handmate UV 600 in any other way than indicated in this user manual for the purpose of maintenance. -
Page 10: Machine Description
3. Machine description This chapter describes the parts and operational use of the DecoRad® Handmate UV 600. 3.1 Function The DecoRad® Handmate UV 600 is the ultimate tool for instantly curing UV (floor) coatings. Please consult our website, www.decorad.com for a recent overview of suitable products! 3.2 Overview of the DecoRad®... -
Page 11: Control Elements
* UV full power can be ignited with the button on the Handmate and / or on the extension pole 3.4 Standard equipment The Handmate UV 600 comes standard with: - Box - Hand and control unit including 1 UV lamp... -
Page 12: Putting Into Operation
Handmate UV 600 v. 2.4 4. Putting into operation Adjust the DecoRad® Handmate UV 600 small handle or the extension handle. The HandMate UV has a power cable of 60 centimeters. Connect the power cable to an extension cord. Mains: 230V +/- 10% / 50 – 60 Hz / 10 – 16 A Carry the power unit by using the lanyard. -
Page 13: How To Start
Handmate UV 600 v. 2.4 4.1 STARTING THE JOB Press the ON button The indicator will burn On the display of the handunit the tekst DONE will appear. Press button with “lamp symbol” On the display of the lamp unit the text WAIT will be shown As soon as the lamp is warm, the text DIM will be shown in the display. -
Page 14: How To Stop
Handmate UV 600 v. 2.4 Shutter on the bottom of the Handmate UV 600. ATTENTION ! SHUTTER IS VERY HOT 4.2 QUITTING THE JOB Press the off button with the lamp symbol to turn off the lamp, the indication will no longer burn. -
Page 15: Error Messages
The UV lamp is too hot, leave the UV lamp 5 minutes to cool down. Turn off the Handmate. Follow the start procedure. Please consult DecoRad® Systems in case of recurrence. E15 (FAN) Fan fail Leave the UV lamp 5 minutes to cool down, turn off the Handmate. -
Page 16: Replacing Lamp
Handmate UV 600 v. 2.4 6. Replacing lamp Replacing UV lamp Caution: Never touch a hot UV lamp Step 1: Place the Handmate on a flat surface with the lamp facing up. Step 2: Plug in to approved power source Step 3: Press ON button. -
Page 17: Specifications
Handmate UV 600 v. 2.4 7. Specifications Handmate UV 600 General Description DecoRad® Handmate UV 600 Brand DecoRad® Colour Silver / black Cure path 10 cm Distance to object 2-4cm Measurements and weights Weight hand unit (kg) Appx. 1,3 Measurements hand unit (cm)