General Information Safety Warranty Before you undertake any exercise program, Hupa International Sports warrants your product please be sure to consult with your doctor. for a period of 1 year for the frame and 90 days Frequent strenuous exercise should be on all parts if the item is used for the intended approved by your doctor and proper use purpose, properly maintained and not used...
Page 3
Hardware & Tool List The following hardware is used to assemble your unit. Please take a moment to familiarize yourself with these items. PLEASE NOTE: some of these parts may have already been pre-assembled on your unit. Bolt #7. Bolt (M8×50 mm) #2.
Parts Listing The following parts list describes all of the parts illustrated on the exploded diagram on the following page. Please note, most of these parts are already pre-assembled on your unit. Description Monitor Bolt (M12 ×160 mm) 3L/R Pedal Lock Bolt (M16×27 mm) Wire 6L/R Oval End Cap...
Exploded Diagram The following diagram is provided to help you familiarize yourself with the parts and hardware that will be used during the assembly process. Please note that not all of the parts and hardware you see here will be used while you are assembling the machine because some of these items are already pre-installed.
Page 6
Assembly Instructions A s s e m b l y S t e p 1 Hardware and Tool Required Bolt Attach the Front Stabilizer (#9) to the Main Frame (#27) with the wheels of the Front Stabilizer (#9) facing the front of the unit and align the holes on the Main Frame (#27) to the Front Stabilizer (#9).
Page 7
Assembly Instructions A s s e m b l y S t e p 2 Hardware and Tool Required Secure a Bolt (#2) to the lower hole on the left side Bolt of the Main Frame (#27). Insert a Bolt (#2) through the left Pedal (#3L) and secure it to the top hole on the left side of the Main Frame (#27) as indicated in the illustration below.
Page 8
Assembly Instructions A s s e m b l y S t e p 3 Hardware and Tool Required Slide the Seat Cushion (#18) in to the Aluminum Track Bolt (#21) as illustrated in the diagram below. Once the Seat Cushion (#18) is in the Aluminum Track (#21), slide the Axle (#22) in to the Block (#23) and through the Aluminum Track (#21).
Page 9
Assembly Instructions A s s e m b l y S t e p 4 Hardware and Tool Required Bolt Remove the Lock Bolt (#4) which were pre-assembled on the Main Frame (#27) and set them aside as they will be used in a later process.
Page 10
Assembly Instructions A s s e m b l y S t e p 5 Carefully pull out the Strap (#31) and hold on the Strap (#31) while removing the Protective Packing Material (#32) without letting go of the Strap (#31). Insert the Handlebar (#30) through the Strap (#31) and align the Handlebar (#30) to the center of the strap.
Page 11
Assembly Instructions A s s e m b l y S t e p 6 The Monitor (#1) can be tilted upwards slightly when you push the top of the Monitor (#1). BRW7200/7900 BODY ROWER Page 10...
Safety Instructions • Make sure all bolts are tightened. • Check for loose parts and components • Check to see if there are any tears or bends in the welding or metal. • Be sure that all adjustment locking devices and safety devices are properly engaged prior to use! BRW7200/7900 BODY ROWER Page 11...
Usage Guidelines Foldable The Aluminum Track (#21) can be folded upwards to save space. In order to free the Aluminum Track (#21) turn the Lock Bolt (#4) in the direction indicated in illustration (D) and pull downwards to free the Lock Bolt (#4). While pulling down on the Lock Bolt (#4), you can now carefully lift the Aluminum Track (#21) up until the Lock Bolt (#4) goes into place.
Computer Operation Function: 1.Program: 11 programs as following A: 1 Manual Program (See fig 1) STROKES STOP DISTANCE TIME LEVEL fig 1 B: 6 Preset Program Profile: (See fig 2~fig 7 ) STROKES STROKES STROKES STROKES STROKES STROKES STOP DISTANCE STOP DISTANCE STOP...
Page 15
Computer Operation Buttons: 1.MODE In "stop" mode(display STOP), press MODE button to enter into program selection and setting value which flash in related window. A: When you choose the program, press MODE to confirm the one you like. B: When in setting, press MODE to confirm the value that you would like to preset. During any mode, hold down this button for 2 seconds to totally reset the computer.
Page 16
Computer Operation B.Press MODE to confirm your choice and enter time setting window. C.The time display will flash, and then press UP, DOWN to set the desired time to do the exercise. Press MODE to confirm the value. D.The distance will flash, and then press UP, DOWN to set up the desired distance value. Press MODE to confirm the value. If already set the time, "SPM" will flash and display the target average rowing speed.
Page 17
Computer Operation 4.Pulse Measurement Wear the chest strap and measure your heart rate, the computer will show your current heart beat rate in beats per minute (BPM) on the LCD after 3~4 seconds. During the measurement, heart icon will flash with simulative ECG showing. Remark: During the process of pulse measurement, because of the contact jamming, the measurement value may not be stable when start, then it will return to normal level.
Page 18
Transmitter Belt Operation Introduction The transmitter chest belt will detect heart rate signal and wirelessly transfer the signals to the receiving terminal like pulse a watch, exercise computer, etc, where will display the heart rate readout. This measurement will be accurate. It applies low frequency for transmission and environmental‐conserved materials. The water‐resist design will protect it from sweat during exercise. Feature 1. The transmission frequency is 5.3K HZ and it is compatible with POLAR. 2.
Page 19
Thanks for choosing BRW 7200/7900 Store Location: Hupa International hupa.net Version: 02-22-2011...
Page 20
Hupa international • 21717 Ferrero Parkway, Walnut, CA 91789 • Telephone: (888) 266 - 6789 • Email: info@hupa.net...
Need help?
Do you have a question about the BRW 7200 and is the answer not in the manual?
Questions and answers