Actual Size - Faber JP Manual

PRG2 PRG2
Serial Programming Keyboard
DESCRIPTION
The PRG2 keyboard is the simplest device that can be used to tune working parameters of FABER-COM
microcontroller electronic cards.
With PRG2 keyboard and the help of the flashing LED on it, you will be able to scroll the working parameters and
tune them at will.
LED

ACTUAL SIZE

FABER-COM srl - Via Romana 36/1 - 42028 Poviglio (RE) - Italy Tel. +39-0522-960428 Fax. +39-0522-969644 - www.fabercom.it FABER-COM srl - Via Romana 36/1 - 42028 Poviglio (RE) - Italy Tel. +39-0522-960428 Fax. +39-0522-969644 - www.fabercom.it FABER-COM srl - Via Romana 36/1 - 42028 Poviglio (RE) - Italy Tel. +39-0522-960428 Fax. +39-0522-969644 - www.fabercom.it
Tecnico\Prodotti\Manipolatore\Jp\Documenti\SM#Manuale JP_v102_ie.cdr - 11/01/07
PRG2
PREV PREV NEXT NEXT
FABER -
COM
At the end of the programming phase, it is necessary to save
parameters in memory by pushing contemporaneously the
PREV and the NEXT buttons, otherwise all the modifications
will be lost when the device will be turned off.
PRG2 keyboard connector can be plugged in and pulled out
from his socket on the electronic card even with the system
turned on.
The presence of the programming keyboard will be
automatically detected and the device will go in programming
mode.
The LED shows, with a series of flashes, the current
programming step.
WORKING SPECIFICATIONS
Increase the value of the current parameter.
Go to the next parameter.
(once reached the last parameter, restart from the first)
Push PREV and NEXT together to send a SAVE
command
Go to the previous parameter.
(once reached the first parameter, stay there)
Decrease the value of the current parameter.
"+", "-", "Prev" and "Next" keys have the
function that starts 1/2 sec. after they have been pressed.
FABER - COM
AUTOREPEAT
Page 8 / 8