Related Manuals for Mottura GOOUT 86G271
Summary of Contents for Mottura GOOUT 86G271
- Page 1 SECURITY LOCK with PANIC EXIT DEVICE INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS EN 179 : 2008 EN 1125 : 2008...
-
Page 2: Important Warning
In the event of a recurring fault of the same cause, or of an unrepairable fault, Mottura Serrature di Sicurezza S.p.A., at its sole discretion, may decide to replace the entire product. -
Page 3: Istruzioni Di Montaggio
Istruzioni di montaggio EMERGENCY HANDLE PANIC-BAR VERSION UNI EN 179 UNI EN 1125 Center the plate (supplied) on the lock by using the two pins on the lock. Fix the lock to the frame (door fixing surface) with M6 screws (not supplied), using the bushings (ref. B) on the lock. For side connection, use M6 cage nuts (ref. - Page 4 EMERGENCY HANDLE UNI EN 179 PANIC-BAR VERSION UNI EN 1125 A = SIDE CONNECTIONS - B = BUSHINGS - M = HANDLE SIDE VERSION 3-POINT VERSION 99289GB - GOOUT - REV. 00...
- Page 5 EMERGENCY HANDLE UNI EN 179 PANIC-BAR VERSION UNI EN 1125 Drill the inner door panel (refs. M, E). Drill Ø6 (ref. G) only in case Drill the inner door panel (refs. P, M on lock side and ref. P on of outside handle.
- Page 6 PANIC-BAR VERSION UNI EN 1125 With 4+4 M5 screws (ref. V1), fix the main device support plate and the idle side plate on the inside panel using fixing pins P. N.B. The support surface for the idle side plate must be sufficiently rigid (use a stiffener clasp). Measure the distance between the two external faces of the plates previously fixed on the door panel.
- Page 7 PANIC-BAR VERSION UNI EN 1125 Mounting the bar Mount the bar on the Press the pin to uncouple door by inserting first the device. the main device and then the secondary CLICK device, using the sup- port pin on the idle side plate.
- Page 8 (EN 1125). FIXING THE CYLINDER: For good operation of the lock, we advise you to install a MOTTURA CHAMPIONS® Europrofile double or half-cylinder (depending on the application). DO NOT use cylinders with knobs. For better protection of the cylinder from outside the door, we advise you to use MOTTURA DEFENDER®...
- Page 9 EMERGENCY HANDLE UNI EN 179 PANIC-BAR VERSION UNI EN 1125 CONFIGURATIONS : INSIDE OUTSIDE Double cylinder + handle version Double cylinder version half cylinder version N.B. The cylinder, escutcheons, and outside handle are not included in the pack. When installation is complete, check good operation of the device as follows: with the door closed (cylinders turned), push the horizontal bar/handle and check that the door opens with a light push and without any impediment (see the reference standard for load values and tests).
- Page 10 EMERGENCY HANDLE UNI EN 179 PANIC-BAR VERSION UNI EN 1125 CE mark with Standard and identification Date number Standard and Date Certifying Body Classification Manufacturer Certifying Body Manufacturer CE mark with Classification identification number EMERGENCY HANDLE UNI EN 179 PANIC-BAR VERSION UNI EN 1125 Category of use - Only one level 3 category of use is identified...
-
Page 11: I N S Ta L L At I O N S H E E T
I N S TA L L AT I O N S H E E T CLIENT ADDRESS CITY DISTRICT POST CODE HEAD OFFICES No. DOORS DOOR CONFIGURATION INSTALLED DEVICES OUTCOME No. DEVICE CODE DATE OPERATING FORCE (N) NOTES SIGNATURE (max 80N) INSTALLER DATA COMPANY NAME STAMP AND SIGNATURE... -
Page 12: M A I N T E N A N C E S H E E T
M A I N T E N A N C E S H E E T MAINTENANCE ENGINEER DATA COMPANY NAME STAMP AND SIGNATURE ADDRESS POST CODE CITY DISTRICT TEL. EMAIL MAINTENANCE START DATE SCHEDULED INSPECTION LOG OUTCOME No. ITEM CODES DATE OPERATING FORCE (N) NOTES SIGNATURE (max 80N) www.mottura.it SAFEGUARDING YOUR SECURITY...
Need help?
Do you have a question about the GOOUT 86G271 and is the answer not in the manual?
Questions and answers