Specifications - Sony DVP-NS400D Operating Instructions Manual

Specifications

System
Laser
Signal format system
Audio characteristics
Frequency response
Signal-to-noise ratio (S/N ratio)
Harmonic distortion
Dynamic range
Wow and flutter
Outputs
Jack name
LINE OUT L/R (AUDIO) 1/2
DIGITAL OUT (OPTICAL)
DIGITAL OUT (COAXIAL)
LINE OUT (VIDEO) 1/2
S VIDEO OUT 1/2
COMPONENT
VIDEO OUT(Y, P , P )
B R
5.1CH OUTPUT
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Supplied accessories
See page 14.
Specifications and design are subject to change without notice.
E S
is a U.S. registered mark. As an
NERGY TAR R
has determined that this product meets the
Semiconductor laser
NTSC
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
115 dB (LINE OUT L/R (AUDIO) 1/2 jacks only)
0.003 %
DVD: 103 dB
CD: 99 dB
Less than detected value (±0.001% W PEAK)
Jack type
Phono jack
Optical output jack
Phono jack
Phono jack
4-pin mini DIN
Phono jack
Phono jack
120V AC, 60 Hz
13 W
430 74 256 mm (17 × 3 × 10
2.7 kg (5lb)
5 C to 35 C (41 F to 95 F)
25 % to 80 %
E
NERGY
Maximum output level
2 Vrms (at 50 kilohms)
-18 dBm
0.5 V
P-P
1.0 V
P-P
Luminance signal: 1.0 V
P-P
Color signal: 0.286 V
P-P
Y: 1.0 V
P-P
P , P : 0.7 V
B R P-P
2 Vrms (at 50 kilohms)
1 / in.) (w/h/d) incl. projecting parts
8
E S
Partner, Sony Corporation
NERGY TAR R
S
guidelines for energy efficiency.
TAR R
Load impedance
Over 10 kilohms
Wave length: 660 nm
75 ohms terminated
75 ohms, sync negative
75 ohms, sync negative
75 ohms terminated
75 ohms, sync negative
75 ohms
Over 10 kilohms
81