Table of Contents
Advertisement
CREATING TEXT
The Text Tool
After turning on the V
™ LS6, the home screen will appear. The home
IPER
screen is also the text editor.
To create text on the home screen, simply begin pressing the alphabetic or
numeric keys on the keypad.
cursor.
The cursor is indicated by a dark line or dark box highlighting a
character. To insert blank spaces, press the
down to the next line. Use the directional arrow keys to move the cursor up,
down, right, or left. The maximum number of text characters allowed to be
placed on each line is 32. Typically, continuous tape must be used to fit up to
32 characters on a line. The maximum number of lines available for each
label page is 8.
Inserting or Deleting Text
To remove characters from the screen, press the
the
key will delete one character at a time immediately to the left of the
cursor.
To insert characters into a string of text, move the cursor to the
position immediately to the right of where the text will be inserted and then
begin entering text.
Text Size
The V
™ LS6 has 13 different font sizes available for creating text. The
IPER
font sizes range from 6 pt. to 192 pt. Text size can be increased by pressing
the
key and then the
key
the
key and then the
key
top of the home screen next to the text size icon.
Text will be entered at the position of the
key. Press
key. Each press of
. T
ext size can be decreased by pressing
.
The current text size is displayed on the
25
to move
Advertisement
Table of Contents
