GeTTInG sTaRTeD
How to reset the Range extender and get it connected if you
change your router's network name or password:
step 1: Locate the Range Extender's reset button on the base of the
unit.
step 2: With the unit still powered on, press and hold the Range
Extender's reset button for 10 seconds.
step 3: Connect your computer to the "Belkin.setup" wireless network.
Make sure nothing is plugged into your Ethernet port.
step 4: In your Internet browser, open the address "http://Belkin.
range" and follow the on-screen instructions.
4