GENERAL INFORMATION Main Features For your Safety Unpacking General Operation Front Panel Rear Panel INSTALLATION Connecting to TV& VCR using RCAsupport Connecting to Digital Amplifier MENU INFORMATION Main Menu 1. Edit Channel 1.1 TV Channel List 1.2 Radio Channel List 1.3 Delete Channels by Satellite 1.4 Favorite 2.
Page 3
5. Entertainment 5.1 Youtube 5.2 Daily motion 5.3 IPTV 5.4 Web Radio 5.5 Google Map 5.6 Weather Forecast 5.7 RSS Reader 5.8 Picasa 5.9 Othello/ Sudoku 6. REC 6.1 PVR Storage Information 6.2 PVR Setting 6.3 Timer Setting 6.4 Media Player 6.5 Remove USB Device safely 7.
Page 4
CAUTION: There may be a voltage difference between TV mains GND and satellite signal distribution or Cable TV distribution systems' GND. Or these kinds of voltage differences may appear because of any failure or changing later on the electricity network. In these cases, depending on the voltage difference rate, there may occur heating, fire and other serious damages on TVs and STBs through the socket or cable connections (SCART, HDMI, RF, RCA etc.).
A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features. This also explains special features available only in this DSR in detail, which will allow you to make full use of these feature.
For Your Safety To avoid electric-shock hazards, do not Keep the receiver away from flower vases, open the cabinet, refer servicing to qualified tubs, sinks, etc., in order to avoid damaging personnel only. the equipment. Do not expose the receiver un-der the Do not block ventilation holes of the sunlight.
DiSEqC Remote Control Batteries Guide HDMI cable General Operation Throughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus. These menus will help you get the most from your receiver, guiding you through installation, channel organizing, viewing and many other functions.
Standby On/Off DiSEqC DiSEqC Display DiSEqC window APPs Go to Entertainment main menu The picture is only for reference,please make the object as the standard.
Page 9
This feature has been added to STB Remote controller as an added value and preventing the necessity of keeping the TV RCU at near while watching TV with Next brand STB source.
Rear Panel Front Panel Rear Panel Rear Panel LNB IN: CONNECT TO SATELLITE ANTENNA COMPOSITE VIDEO BROADCAST SIGNAL CONNECT TO A PC FOR S/W UPGRADE POWER ON/OFF CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER CONNECT TO A DIGITAL AMPLIFIER CONNECT TO TV SET DV-OUT INPUT The picture is only for reference,please make the object as the standard.
Connecting to TV using RCA support Satellite Dish VIDEO AUDIO Connecting to Digital Amplifier Satellite Dish DIGITAL AUDIO CONVERTOR OR AMPLIFIER SPEAKER The picture is only for reference,please make the object as the standard.
Main Menu Make sure that you have properly installed and connected the cables of the receiver . If the receiver is the factory status or there is no program list, when power on, the Main Menu window will be displayed on the screen. During the normal TV/Radio mode, press MENU key on the RCU to enter into the Main Menu window.
If there is no program, you can not exit from the Main Menu window by pressing MENU or EXIT key. System will inform "No channel" and the following items turn grey. Sub-menu Turn grey when there is no program Edit Channel TV Channel List Radio Channel List Delete Channels by Satellite...
Page 14
3. Press FAV key to move the FAV button upward. Select the program and press OK key to pop up the favourite group list. In the list, select the group that you want to add into and press OK key, and then you will find the favourite mark is displayed at the right side of the selected program.
Page 15
i . Sort (red colour key) Press red colour key to pop up the Sort drop-down list. Name(A-Z): The ascending order, omitting the $ character, the number is ahead, then the capital letter, at last the lowercase. Name (Z-A): The opposite order of the above Name (A-Z).
iii. Delete (blue colour key) In Delete window, press blue colour key to move the Delete button upward. Select the program and press OK key to mark this program with the deletion mark. You can cancel this mark by pressing OK key again. Press EXIT key to pop up the dialogue "Are you sure to save?".
Page 17
Satellite List 1. Satellite list is on the left side of the window. Press PR+, PR- keys to select the satellite up or down. Press OK key to select and mark, and you can press OK key again to cancel the selection and the mark. 2.
Page 18
Antenna Setup 1. Satellite: All selected satellites in the satellite list are displayed in this item. Press keys to select the satellite in circle. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm.
4. Press green colour key to pop up the Add TP window. Since the same operation as the above Edit TP window, here we don't explain any more. 5. Press yellow colour key to pop up dialogue " Are you sure to delete?". Press OK key at the Yes button to delete the selected TP, or press EXIT key to cancel the operation.
3.2 TV System Press PR+, PR- key to move the cursor up or down, while press keys to change the setting and the setting will take effect immediately. 1. Video Resolution: Select among 480i, 576i, 480p,576p,720P_50,720P_60,1080i_25 ,1080i_30, 1080p_50 and 1080p_60. 2.
3.5 Parental Lock Before entering into the Parental Lock window, you need input the correct password. The default password is 0000. 1. Menu Lock: Press keys to select between Off and On. If select "On" , you can not enter into the window before entering the password.
4. Tools 4.1 Information Press OK key to the Information window. 4.2 Factory Setting Press OK key to enter into the Factory Setting window. Select Yes button and press OK key to return to the factory setting. All searched channels and set information will be erased.
Insert Wifi equipment first, then search available Enter net signal , input the password to connect with network. 5. Entertainment 5.1 Youtube YouTube Video Record: Video contents watched at YouTube can also be simultaneusly recorded to the USB Memory Device. In order to make your product record Video from YouTube, enter the SETTING menu by pressing RED hot color key on the YouTube screen set the Download option as ON.
5.4 Web Radio You can connect to the web radios created by internet users and listen to on line many channels may be fit to the kinds of different style and preference. 5.5 Google Map You can execute Google Map application and use with the RCU keys. Y ou can assign any point on the map as the center using RED hot color key.
6. REC 6.1 PVR Storage Information Yellow key: Press yellow key to format the disk Blue key: Press blue key to pop up DVR Set window. 6.2 PVR Setting 1. Time shift: Select between Off and On. 2. Jump: Select among 30 sec, 1 min, 5 min, 10 min and 30 min.
6.4 Media Player This menu will be disabled when no USB device is plugged. Media Play List will not be saved when USB plug out or standby or power off. Move scroll bar when press up/down key, page up or down by page key. Go into sub-directory when press ok key in the file directory, play the selected file when scroll bar is on the file, automatic return USB menu after play is over.
In music list Press number key 1 to display the Sort window. Press number key 2 to select the repeat mode. The function of colour key is the same as Color key operation In video list Press number key 1 to display the Sort window. The function of colour is the same as Color key operation In record list...
7. Hot Key 7.1 Info Press INFO key to pop up the Info bar. Press INFO key again to pop up the program guide of the current program. 7.2 EPG Press EPG key to enter into the EPG window. 1. Press PR+, PR-, keys to select up or down, left or right.
7.3 Find Press FIND key on to pop up the Find window. Use numeric keys to enter into the character and use the colour keys to realized the corresponding operation. 7.4 Number Use the numeric keys (0-9) to input the number of the desired channel.
7.11 Audio 1. Press keys to enter into the Audio window. 2. Press keys to select among Left, Right, Stereo, and Mono. 3. Changing the audio mode is only connected with the current channel, not all the channels. 4. Press MENU or EXIT key to close this window. 7.12 Recall Press key to switch the current channel to the previous channel.
Page 31
Problem Possible causes What to do The display on the front Check that the main cable is plugged into Main cable is not connected. panel does not light up. the power socket. No sound or picture, but the receiver is in standby mode. Press the standby button.