Rear Panel
10
Location and Function of Parts and Controls
1
2 3 4
1 F. GND (Frame ground) tab
Connect with one of the host computer's ground cables when the
frame of the drive unit is not in direct contact with the computer.
2 Unused
3 ANALOG AUDIO connector
Outputs analog audio signals.
4 Configuration Jumpers
See page 13 for details.
5 INTERFACE CONNECTOR (IDE bus)
Connect to IDE port of the host computer using a connecting
cable.
6 DC INPUT (power-in) connector
Connect to the power supply of the host computer.
Pin 1
5
6