Table of Contents
Advertisement
LAN IP Address
Selecting LAN IP Address in the "Configuring the Advanced Settings" screen gen-
erates the "
LAN IP
The values in the
"LAN IP
and Subnet mask of the Router as seen on the network. These values can be modi-
fied for your
LAN
settings (
address
IP
☞
Note: If the Router's
Server range is within the same subnet. For more infor-
DHCP
mation, see "
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
DHCP Server
Server in the "Configuring the Advanced Settings" screen gener-
Selecting
DHCP
ates the "
Server" screen. The Router has a built-in
DHCP
Configuration Protocol) server that automatically assigns a different
each computer on the network, eliminating
The factory default setting is On. To disable the
Chapter 4 Using Advanced Setup
Address" screen.
Address" and "Netmask" text boxes are the
network, but Actiontec recommends keeping the default factory
Subnet mask
192.168.0.1;
LAN IP
Server Configuration."
DHCP
255.255.255.0
Address is modified, ensure the
address conflicts.
IP
Server, select Off.
DHCP
49
address
IP
).
(Dynamic Host
DHCP
address to
IP
Advertisement
Table of Contents
