WiMOD LR Starter Kit Quick Start Guide Introduction The WiMOD LR Starter Kit is a plug & play solution to explore features and capabilities of the iM880B/iM881A WiMOD LR radio module. This document describes how to get the Starter-Kit SK-iM880B or SK-iM881A running.
Quick Start Guide Getting Started Software Setup The WiMOD LR Studio can be used for configuration of the preprogrammed radio modules and provides an easy-to-use radio link evaluation. Setup of the PC First copy the complete content of the enclosed installation CD to a local folder on your PC.
Quick Start Guide Hardware Setup Setup of the Demo Boards Figure 1: WiMOD LR module iM880B and Demo Board - Plug the adapter boards with the soldered radio module on the Demo Boards. - Mount the antennas on the boards.
Page 5
USB cables to your PC and switch them on 3. After the initial virtual COM Port installation is finished the WiMOD LR Studio automatically detects the devices. The two boards will be listed in the left toolbar. If not try to find them by clicking Discover Devices.
Important Notice Disclaimer, limited liability and usage restriction IMST GmbH points out that all information in this document is given on an “as is” basis. No guarantee, neither explicit nor implicit is given for the correctness at the time of publication.