Sony SLT-A65V &alpha Handbook page 169

card inserted in the camera, set [Upload Settings] to [Off].
screen when [Upload Settings] is set to [Off].
• When you use a brand-new Eye-Fi card for the first time, copy the install file of Eye-
Fi manager recorded on the card to your computer before formatting the card.
• Use an Eye-Fi card after updating the firmware to the latest version. For details, refer
to the manual that comes with the Eye-Fi card.
• The power save function of the camera does not work while it is uploading images.
• If (error) is displayed, remove the memory card and reinsert it, or turn off then
turn on the power again. If
• Wi-Fi network communication may be influenced by other communication devices.
If the communication status is poor, move closer to the access point of the Wi-Fi
network.
• For details on the file types that can be uploaded, refer to the operating instructions
supplied with the Eye-Fi card.
• If you upload an image that was recorded with [GPS On/Off] set to [On], the
location information of the image may be made available to a third party. To prevent
this, set [GPS On/Off] to [Off] (page 154) (SLT-A65V only).
• This product does not support the Eye-Fi "Endless Memory Mode." Make sure that
Eye-Fi cards that you insert into this product have "Endless Memory Mode" turned
off.
Setting the method for recording on a memory card
appears again, the Eye-Fi card may be damaged.
is displayed on the
169