Make And Receive Phone Calls - hi-Fun hi-Call User Manual

Glove handset
Hide thumbs Also See for hi-Call:
Table of Contents

Advertisement

Available languages

Available languages

mobile phone or other Bluetooth compatible devices, within 2
minutes. If during this time lapse hi-Call is not paired to any device
it turns off automatically. As soon as the device is paired the
indication LED (2) flashes slowly in blue.
Now is possible to make and receive calls with hi-Call.
If hi-Call was previously paired to a different device, it can be
switched again in pairing mode in order to pair it to another
device. You need to un-pair hi-Call from the paired device (check on
the device userʼs manual). At first the LED (2) will start flashing in
blue for a few seconds and afterwards hi-Call will switch in pairing
mode, signalled by the LED (2), which will flash alternately red and
blue.
3) Switch off hi-Call.
To switch off hi-Call hold the power button (3) until the LED (2)
flashes twice in quick succession. Immediately will hi-Call turn itself
off.

Make and receive phone calls

If hi-Call is paired to a mobile phone, it is possible to make and
receive phone calls thanks to the microphone and the auricular
placed respectively on the little finger and on the thumb of the left
glove. The buttons which control hi-Call functions are placed on the
back side of the glove over the wrist.
1)Answer an incoming call.
To answer an incoming call press briefly the multifunction button
(1).
2) End a phone call.
To end a phone call press briefly the multifunction button (1) when
you want to end the call.
3) Reject an incoming call.
To reject an incoming call hold the multifunction button (1) for 2
second, then release it. The incoming call is rejected.
4) Activate voice dialing / voiceover / Siri.
When there are no calls in progress it is possible to activate voice
dialing / voiceover / Siri from your mobile phone using hi-Call.
To activate voice dialing / voiceover / Siri hold the multifunction
button (1) until you hear a tone from the speaker on the thumb of
your left glove, afterwards release the multifunction button (1);
when you hear the second tone you can pronounce the command.

Advertisement

Table of Contents
loading

Table of Contents