Preparations; Attaching The Hdca-901 To A Hdw-F900; Settings On The Hdw-F900 - Sony HDCA-901 Operation Manual

Preparations

Attaching the HDCA-901 to a
HDW-F900
1
Remove the two screws and loosen the precision
screw, and then remove the cover.
Back of the HDW-F900
Note
• Keep the removed cover.
• When the HDCA-901 is not attached, keep the cover
fixed.
2
Attach the HDCA-901 to the back of the HDW-
F900.
Back of the HDW-F900
6(GB)
Screw
Precision screw
Cover
HDCA-901
Locationing pin
Battery connector
Connector
3
Tighten the screws.
For details on attaching a battery pack or UHF portable
tuner to a camcorder with the HDCA-901 attached, refer to
the Operation Manual of the HDW-F900.

Settings on the HDW-F900

Activate MAINTENANCE menu on the camcorder
and select the VTR SETUP. Then make the following
settings:
• Set PB AUDIO CH to 1/2
• Set AU REC CH3/4 to AUTO
During the playback, the audio signals of CH1/2 are
output from the camcorder.
During the recording, the audio signals of the AUDIO
IN CH-3/CH-4 connectors on the HDCA-901 are
recorded to CH3/4 as they are.
For details on activating MAINTENANCE menu, refer to the
Maintenance Manual of the HDW-F900.