Related Manuals for Noblift SPT15 Series
Summary of Contents for Noblift SPT15 Series
- Page 1 WARNING △ Do not use the stacker before reading and understanding this operating instructions. Chinese well-known trademark National inspection-exempted product NOTE! Keep for future reference. Operating Instructions / Parts List SPT15 Power Pallet Truck...
- Page 2 Foreword Welcome to choose our SPT15 series power hydraulic pallet truck You should be an expert for operating this truck after you carefully read and understand this manual thoroughly. This Operation Instruction is edited for you to completely acquire and master the safety operation,...
- Page 3 1 Safety Operation Regulation 1.1 Operator should be qualified The pallet truck must be operated by trained person, who can demonstrate moving and operating the pallet truck to user and can definitely instruct the user how to operate the truck. 1.2 Right, obligation and responsibility of operator The operator must fully understand his right and obligation and had already received the training of the pallet truck operation.
- Page 4 devices witch aim to protect the operator and the equipment from the danger， for example, when the pallet truck working in a oil-house, the anti-static devices must be equipped. △ This pallet truck is designed for normally work environment only ! 1.7 Driving in public areas The pallet truck is forbidden for driving on the public road except the specified area.
- Page 5 1.13 Parking safety The parking safety is necessary. The pallet truck have to be parked on the qualified area witch is level and solid. Prohibit parking the vehicle at the slope or the inclined plane. The forks must be lowered to the lowest position after working, so no accident occurring when the fork dropping suddenness.
-
Page 6: Technical Specifications
Technical Specifications SPT15 series power pallet truck is a new product designed on the base of normal hydraulic pallet truck. It’s maximum load weight is 1500 Kg; the one of the merits of this product is motor drive without manpower for pushing or drawing of the pallet truck, this matter is absolutely evidence when working under hard working condition. - Page 7 2.2 Technical standard Durative noise level must be < 70dB(A); Refer to ISO4871 Standard The continuous noise level (the sound pressure level) is a value averaged that is measured according to standard regulations during the truck was driving , lifting, and idling. The point where the sound pressure level is measured is at the ear.
-
Page 8: Transportation And Commissioning
3 Transportation and Commissioning 3.1 packing and delivery △ The pallet truck is packed by wooden material and it can be loading or unloading by crane or forklift. 3.2 assembling handle You need some kind of tools, such as a hammer, a pliers, etc. some more, you also need sort of fittings, such as a bored-shaft, two elastic pin (remarks: the one of the two have already assembled on the bored-shaft, these two fittings have been put into a plastic bag, the bag has been bound to the handle by adhesive tape ) - Page 9 (206) into the hydraulic pump and draw-bar from the right to left. 2.2 Let control handle(217) to the ‘LOWER’ position, then pass the adjusting nut(207), adjusting bolt(208) and chain(209) through the hole of axle(206) with your hand. 3.2.3 Press the draw-bar (211) down, take away the pin(#2). 3.2.4 Let the control handle (217) on ‘RAISE’...
- Page 10 3.3.4 If the forks do not elevate while pumping in the RAISE position, turn the nut (207) or screw (111) counter-clockwise until the forks elevate while pumping in the RAISE position. Then check the LOWER and DRIVE position according to item 3.1, 3.2 and item 3.3. 3.4 Electric wiring for handle ①...
- Page 11 4 Operation Instructions 4.1 Driving handle 4.1.1 Control handle: it has three position, Raise, Drive and Lower, (See 3.3), control the fork down and up. 4.1.2 FWD-BWD Tuning Knob: Control the speed of the stacker and moving direction: forward or backward.
- Page 12 4.3 The Truck Operation 4.3.1 Operation of Starting up, Driving and Parking Enough caution must be attached for starting up and driving of the truck, especially when the person body reaching out of the truck. Make sure that during driving, it is prohibited to carry any person.
- Page 13 et the handle-bar be vertical, the driving motor is stopped mechanically. After releasing the handle-bar, it will be vertical automatically. After parking of the truck, the electromagnetic braking takes the function of park braking. Reversing current braking In case of control system or driving power malfunction, it is possible to use reverse braking. Rotate the FWD-BWD Tuning Knob against the direction of driving until the truck is stopped.
- Page 14 Maintaining, Charging and Replacing the Battery 5.1 operation safety regulation of battery Before any operation on the battery, you should park the vehicle stably and safely. 5.1.1 maintenance staff The operation of charge, repair and replacement of battery should be performed by qualified professionals.
- Page 15 5.1.4 Disposal for old battery Old battery must be recall or deposit at the safe-environmental area or special disposal area appointed by the local government, the department that dispose these scrap should be authorized. . As the electrolyte in battery is poisonous and corrosive, the man who operate the battery should be performed in overall and protection goggles to avoid body touching the acid solution of the battery.
- Page 16 with instruction manuals provided by battery supplier and charger supplier. During charge course of battery, keep airy condition. Before charge, make sure no metal object on the battery and check up if there is any obvious fault on joints of the all of the cables and plugs. The safety instructions, including the requirement for supply battery and the preparing of charging battery, should be abided by strictly.
-
Page 17: Maintenance Instructions
6 Maintenance instructions Daily maintenance for this SPT15 series semi-electric hydraulic pallet truck is necessary. 6.1 daily checking and maintenance 6.1.1 Hydraulic oil: once every six month for oil level checking. gross oil volume is 0.3 liter. Choose the hydraulic oil according to the form as bellow:... - Page 18 6.2 Fault diagnosis cause results fault -the forks cannot - the hydraulic oil is not enough - add hydraulic oil reach highest position - without hydraulic oil - add hydraulic oil - impure hydraulic oil - replace hydraulic oil Forks cannot - Adjusting nut (207) is too high or - repeat to adjust the nut (207) or...
-
Page 19: Circuit Diagram
7 ELECTRICAL DIAGRAMS 7.1 CIRCUIT DIAGRAM 7.2 CONNECTION DIAGRAM... - Page 20 7.3 Layout for electronic components Description qty. remarks drive wheel 91L-DC 0.4KW/24V bolt screw contactor HZBD-80/24 fuse screw fuse base rectangle electric meter screw screw Built-in charger QQE192-4CH12-B battery 6-DM-38 screw alarm buzzer XS2243-6100 controller（SHIN20） screw...
- Page 21 parts manual 8.1 Oil pump...
- Page 22 Parts of pump Description Qty. Drive wheel Caster wheel Connect shaft Bolt Connect sleeve Bolt Thrust Plate Valve Cartridge Lever Plate Adjusting screw Pump body Seal washer Screw plug Y - ring O - ring Dust ring Piston rod Steel ball Pump piston Spring cap Spring...
- Page 23 8.2 Parts of handle...
- Page 24 Parts of handle Description Qty. Bushing Bushing Pressure Roller Roller shaft Roll pin Axle with Hole Locknut Adjust bolt Chain Release Rod Handle Screw Screw Cover Steel ball Spring sleeve Control handle Spring Steel ball Cover of handle FWD-BWD Tuning Knob Reversing switch Inner base of Reversing switch Horn button...
- Page 25 8.3 Parts of fork frame...
- Page 26 Parts of fork frame Description Qty. Fork frame Shaft Shaft for Rock - Arm r Rock - Arm Joint Retaining Ring Push rod Shaft Roll pin Roll pin Frame of Roller Linking Plate Bearing Roll pin Shaft for roller Load roller Bolt Enter Roller Shaft6...