Viewing Images On A Tv Screen - Sony CD Mavica MVC-CD500 Operating Instructions Manual

Viewing images on a TV screen

1
A/V OUT (MONO) jack
, Connect the supplied A/V
connecting cable to the A/V
OUT (MONO) jack of the
camera and the audio/video
input jacks of the TV.
If your TV has stereo input jacks, connect
the audio plug (black) of the A/V
connecting cable to the Lch jack.
• Turn off both your camera and the TV before
connecting the camera and the TV with the A/V
connecting cable.
• We recommend using the AC Adaptor
(supplied) to prevent the power from turning off
partway.
34
A/V
connecting
cable
(supplied)
2
, Turn on the TV and set the TV/
Video switch to "Video".
• The name and location of this switch may differ
depending on your TV. For details, see the
operating instructions supplied with the TV.
TV/Video switch
101-0002 2003 7 4
BACK/NEXT
3
, Set the mode dial to
turn on the camera.
Press b/B on the control button to select the
desired image.
• When using your camera abroad, it may be
necessary to switch the video output signal to
match that of your TV system (page 118).
VGA
2 9
101 /
10:30
PM
VOLUME
, and