Troubleshooting
Fuzzy specks appear in images shot using the flash.
•
Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This
is not a malfunction (page 11).
The close-up shoot function (Macro) does not work.
(Twilight mode) or
•
The date and time are not displayed.
While shooting, the date and time are not displayed. They are displayed only during playback.
•
Cannot insert dates on images.
This camera does not have a feature for superimposing dates on images (page 90).
•
By using "Picture Motion Browser", you can print or save images with the date (page 65).
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 34).
•
The screen is too dark or too bright.
Select the brightness of the LCD backlight (page 18).
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 37) or adjust the exposure (page 34).
The image is too bright.
Adjust the exposure (page 34).
•
The image colors are not correct.
Set [COLOR] (Color Mode) to [Normal] (page 33).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring and white, black, red, purple, or other streaks appear on
•
the image. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
86
(Landscape mode) is selected in the Scene mode (page 27).