Sony Cyber-shot DSC-S600 User's Manual / Troubleshooting page 86

Others
Your camera does not work.
Use the type of batteries you can use with this camera (page 92).
•
The battery level is low (The E indicator appears). Install new batteries or charged Nickel-
•
Metal Hydride batteries (t step 1 in "Read This First").
The power is on, but the camera does not work.
The built-in microcomputer is not working properly. Remove the batteries, and then, after one
•
minute, insert the batteries and turn on the camera.
Cannot identify an indicator on the screen.
See page 16.
•
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it (page 94).
The camera becomes warm when you use it for a long time.
This is not a malfunction.
•
The lens does not move when you turn off the camera.
• The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries
(t step 1 in "Read This First") or use the AC Adaptor (not supplied).
The Clock Set screen appears when you turn on the camera.
Set the date and time again (t step 2 in "Read This First").
•
86