Control Signal Connection; Control Signals Using A Single-Ended Signal Common; Anode Connection - JMC MCAC806 Manual

Shenzhen Just Motion Control Electromechanics Co.,Ltd

6 Control signal connection

6.1 Control signals using a single-ended signal common

anode connection, as shown below:
Note : When VCC is 5V, R shorted;
When VCC is 12V, R is 1K, more than 0.125W resistance;
VCC is 24V, R is 2K, 0.125W greater resistance;
Above resistance must be connected to the control signal terminal.
www.jmc-motion.com 23
.
0755-26509689