SENSE: Optimum wash results coupled with maximum
The two sensor-controlled programmes are recommended for
They use double sensor technology designed to ensure optimum
wash results with minimum water and energy consumption.
Indicator lamp lit while the dishwasher is operating.
Flashes when a fault occurs.
Switches off at the end of the programme.
Half Load / Multizone button
Load the upper or lower rack only.
This function can be used with any programme.
Press once = upper rack (the indicator lamp comes on)
Press twice = lower rack (the indicator lamp comes on)
Press 3 times = Off (half load function deactivated).
Normal 40 - 55° C
Intensive 60 - 70° C
Glasses 40° C
Bio 50° C
Values may vary in relation to usage, e.g.: different loads, water temperatures
(above or below 15° C), water hardness and power supply voltage, etc.
Reference programme for Test Institute and energy-label.
Quick Reference Guide
Further indications are given in the pages to follow and in the user instructions.
Programme selection and
recommended load type
Recommended programme for routine washes, for crockery with
little or no dried-on food.
Recommended programme for heavily soiled crockery, with
dried-on food. Especially suitable for pans and saucepans.
Crockery to be washed later.
Light soiling, especially glasses and cups.
Lightly soiled crockery with no dried-on food.
Normally or heavily soiled crockery with dried-on food.
Delayed start button
The wash cycle can be programmed to start
after 1-9 hours. With each successive touch of
the button, the delayed start indicator
increases by 1 hour, and after 9 returns to 0.
Then press the Start button.
The dishwasher will start at the set time.
Rinse aid level indicator
Add rinse aid.
Salt level indicator
Add regeneration salt; only add regeneration
salt immediately before starting a wash
Place the detergent in the:
Programme progress indicator
Pre-rinse / Pre-wash
Normal Load /
(Half Load / Multizone)
5019 100 91350
(We reserve the right to make technical modifications)