Adjusting The Exposure; Ev Adjustment - Sony DSC-P92 Operating Instructions (primary manual) Operating Instructions Manual

a Set the mode selector to
.
b Press MENU.
The menu appears.
c Select
(Focus) with b/B,
9
then select the distance to the
subject with v/V.
You can select from the following
distance settings.
0.5m, 1.0m, 3.0m, 7.0m,
distance)
7.0m
3.0m
1.0m
0.5m
Center AF
Multi AF
Focus
To return to auto focus mode
In step 3, select 9 (Focus), then select
[Multi AF] or [Center AF].
• Focal point information may not show the exact
distance. Use it as a guide.
• If you point the lens up or down, the error
increases.
• If focus preset value flashes with [0.5m]
selected, press the zoom W button until the
value stops flashing.
46
or
Adjusting the
exposure

– EV adjustment

Mode selector:
Used when you want to change the
automatic exposure to one of your own
choice. The value can be set a range from
+2.0EV to –2.0EV, in 1/3EV increments.
∞
(unlimited
Before operation
When shooting still images, set
(Camera) to any mode other than [Auto] in
1.0m
the menu settings (page 23).
Control button
WB
a Set the mode selector to
/
MENU
Mode selector
.
b Press MENU.
The menu appears.
c Select
(EV) with b/B.
The value of the exposure adjustment
is displayed.
0EV
EV
d Select the exposure
adjustment value.
Select the exposure adjustment value
v/V
with .
Make your adjustment while
confirming the brightness of the
background of the subject on the LCD
screen.
To return to auto adjust mode
Return the exposure adjustment value to
0EV.
• When the subject is extremely bright or
extremely dark, or when you are using the
flash, the adjustment may not work.
or
0EV
WB