Download Print this page

Atexor MICA Series User Instructions page 4

Advertisement

MICA IL-80 ATEX LED
Classification
II 2G Ex eib op is IIC T4 Gb
II 2D Ex tb IIIC T135°C Db
IP rating:
IP67
Certificate:
VTT 12 ATEX 004X Issue 1
Lamp designed and manufactured according to the European standards
EN 60079-0, EN 60079-7, EN 60079-11, EN 60079-28 and EN 60079-31.
MICA IL-80 ATEX LED SAFETY INSTRUCTIONS:
Before using the lamp:
- Cleaning and other preparations must always be carried out before moving to the explosion hazard
area.
- The charger must be installed outside the explosion hazard area. Recharging the lamp in the explosion
hazard area is not allowed.
Using the lamp:
- Check that the classification of the explosion hazard area matches the classification of the lamp. Do
not use the lamp in areas where it is not intended to be used!
- The lamp may not be opened in the explosion hazard area.
- If the lamp malfunctions, leave the explosion hazard area.
- If the machine plate cannot be read or is missing, the lamp may not be used in the explosion hazard
area.
- No labels or other additional parts may be attached to the lamp.
Maintenance of the lamp:
- Only a technician with electrical qualifications may carry out maintenance on the lamp.
- Maintenance is carried out outside the explosion hazard area.
- Only original MICA spare parts may be used.
TECHNICAL DATA:
Battery
Glass lens
Reflector
Operating temperature
Ingress protection
Weight
Light source
Compatible charger:
TERMS AND CONDITIONS OF GUARANTEE:
A two-year guarantee from the purchase date is granted for the MICA IL-80 lamp, covering any manu-
facturing and material defects according to generally applicable terms and conditions of guarantee.
Please note that the guarantee period for the battery is one year. The guarantee becomes void if the
adjustment values of the electronics components have been changed or if any components have been
harmed in any other way. For maintenance repair, please send the lamp and the charger stand as well
as the purchase receipt with the product. Note! A new MICA lamp/battery must be taken into use or
recharged within three (3) months of manufacture.
© 09-2013 ATEXOR OY
We reserve the right to make changes to these
user instructions without advance notice.
NiMH 6V
110.5 x 5 mm
narrow or medium width
–20°C...+40°C
IP-67
1.1 kg
MICA L200Ex LED
MICA ILC4 series chargers

Advertisement

loading

This manual is also suitable for:

Mica il-80 atex led