Sony DFW-SX910/X710 Technical Manual page 31

Error
Obtain the number of packets.
DFW-SX910/X710
Step 3
PixelNumber is read out.
TotalByte is read out.
PacketParaINQ is read out.
Sets the packet size.
Check the packet size.
No error
Setting completed.
Image transmission is now ready. Send a video start
command to output images.
The camera does not support RecBytePerPacket.
Read F0F10034h. The number of pixels is
obtained. (Use this information if required
by the software application.)
Read F0F10038-3Ch. Total number of
bytes (of the effective image) is obtained.
Read F0F10040h. Packet size that can be
set is obtained. (640 (minimum) and 1280
(maximum) for this camera.)
Write 02800000h in F0F10044h.
(PacketSize = 1280)
Read F0F1007Ch. Check that Bit 9 is not
set. If an error occurs, the PacketSize was
wrong. Try other settings.
Read F0F10048h. The number of packets
per 1 frame is obtained. (The total number
of bytes of data output by the camera:
output = packet size × number of packets)
Control
31