Specifications - Sony DFW-SX910/X710 Technical Manual

Specifications

Image sensor
DFW-SX910 1 / -type progressive scan IT
2
transfer CCD
1
DFW-X710 / -type progressive scan IT
3
transfer CCD
Number of effective pixels
DFW-SX910 Approx. 1,450,000
1392 (H) × 1040 (V)
DFW-X710 Approx. 800,000
1034 (H) × 779 (V)
4.65 µ m (H) × 4.65 µ m (V)
Unit cell size
Interface format IEEE1394–1995
Transfer speed 400/200 Mbps
Protocol IIDC 1394-based Digital
Camera Specification Version
1.30 Compliant
Image format (fixed size)
1280 × 960 YUV (4:2:2)/Mono8
DFW-SX910
1024 × 768 YUV (4:2:2)/Mono8
800 × 600 YUV (4:2:2)/Mono8
640 × 480 YUV (4:2:2/4:1:1)/
Mono8
320 × 240 YUV (4:2:2)
1024 × 768 YUV (4:2:2)/Mono8
DFW-X710
800 × 600 YUV (4:2:2)/Mono8
640 × 480 YUV (4:2:2/4:1:1)/
Mono8
320 × 240 YUV (4:2:2)
Frame rate (depends on the image format)
DFW-SX910 7.5 to 1.875 fps
DFW-X710 15 to 1.875 fps
Image format (Format7) (for Partial scan)
1280 × 960 YUV (4:2:2/4:1:1)/
DFW-SX910
Mono8
1024 × 768 YUV (4:2:2/4:1:1)/
DFW-X710
Mono8
Partial scan function 16 × 16 (256 sections)
Lens mount C-mount
Flange back 17.526 mm
Minimum illumination
20 lx (F0.95, Gain: +18 dB)
White balance One Push/ATW/preset (3200 K,
5600 K)/manual
Hue Adjustable
Saturation Adjustable
Brightness Adjustable
Gamma Variable
CCD Iris ON/OFF
DFW-SX910/X710
Shutter 1/100,000 to 17.5 s
(Absolute value control
possible)
Gain Auto/Manual (0 to +18 dB)
External trigger shutter
Available (Trigger Mode0/1)
Partial scan function (Smallest unit)
80 (H) × 60 (V)
DFW-SX910
64 (H) × 48 (V)
DFW-X710
Power supply/Power consumption
DC +8 to +30 V (from
IEEE1394 cable)
Power consumption 3.5 W (12 V)
Operating temperature
–5 to +45˚C
Storage temperature –20 to +60˚C
Operating relative humidity
20 to 80% (No condensation)
Storage relative humidity
20 to 95% (No condensation)
Vibration resistance 10 G (20 to 200 Hz, 20 minutes
for each direction-X, Y, Z)
MTBF 59549 Hrs (Approx. 6.8 years)
Shock resistance 70 G
44 (W) × 33 (H) × 116 (D) mm
Dimensions
Mass 250 g
Accessories IEEE1394 cable (1)
Lens mount cap (1)
Operating Instructions (1)
Appendix
35