Troubleshooting - Kodak PPS100 User Manual

Appropriate temperature usage
• Charge protection: kodak ppS100 can charge your device when the ambient temperature is bet-
ween 0 - 40°c. outside this temperature range, the system automatically stops charging but will
restart once the temperature is back inside the acceptable range.
• Discharge protection: kodak ppS100 can power your devices when the ambient temperature is
between 0 - 40 °c. outside this temperature range the system automatically stops charging your
device but will restart once the temperature is back inside the acceptable range.
make sure that the electronic device you are powering works properly prior to use. the max. power
consumption for electronic devices is 100w. due to the different types of electric devices,
it is possible that they may not operate even if their power consumption is less than 100w.

9. TROUBLESHOOTING

If your devices are not recharging as they should using KODAK PPS100 follow these steps:
1. ensure the device has been switched on and the led is showing the percentage of remaining charge.
2. check the battery display. if it is at 20% or below, recharge your kodak ppS100.
3. verify your device is suitable for use with the kodak ppS100.
a. all kodak ppS100 output ports have their own max. power. check the kodak ppS100's technical
specifications to ensure your device is compatible.
b. Some devices with rechargeable batteries, like laptops and tablets, may draw more power when in
use. in these cases, power down your device and recharge it.
What should I do if the unit gets wet?
immediately turn off the unit and wait until you are certain that it is completely dry before turning it back
on. if you are unsure about when it is safe to turn it back on, please contact after sales service.
14
ATTENTION