Sony WEGA KV 36HS500 Operating Instructions Manual page 24

Notes on Using This Connection
To Do This ...
Watch the VCR
Watch cable channels
Set up the TV remote control
to operate the VCR
Activate the TV remote
control to operate the VCR
Control VCR functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This ...
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Press TV/VIDEO repeatedly to select the cable input (VHF/UHF in the
illustration).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 43-44.
Set the A/V slide switch to the position you programmed for the VCR. Then
press VCR/DVD FUNCTION.
See "Operating a VCR" on page 58.
See the instructions for setting up Video Labels on pages 72-73.
23