Sony WEGA KV 32FV27 Operating Instructions Manual page 13

1
2
3
4
5
6
Button
qg TV/VIDEO
qh ANT
qj 0 – 9 and ENTER Press 0 - 9 to select a channel, the channel changes after 2
qk SWAP
ql
w; GUIDE
wa CH +/-
ws RESET
wd
AV 1 2 3 DVD
Inside Panel
1 TV/VCR
2 m
REC
M
N
7 x
8
X
3 DVD MENU
9
4 TITLE
q;
5 AUDIO
6 POSITION
7 MTS/SAP
8 FREEZE
9 CH +/–
q; TV/VIDEO
Introducing the FD Trinitron Wega
Description
Cycles through the video equipment connected to the TV's
video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4.
Changes between the VHF/UHF input to the AUX input.
seconds. Press ENTER to select immediately.
Switches the position of the main picture with the window
picture.
Turns on/off PIP. For details, see "Using Picture in Picture
(PIP)" on page 31.
Displays the program guide of your satellite antenna.
Scan through channels.
Press when in a menu to reset the settings to the factory
defaults.
Use to switch control for connected video equipment. You
can program one video source for each switch position. For
details, see "Programming the Remote Control" on page 52.
Switch between TV and VCR mode. If you have a
non-Sony VCR, you will need to program the remote
control to recognize your VCR. For details, see
"Programming the Remote Control" on page 52.
Rewind
Record (press the blank button – above, left – at the same
time)
Fast-forward
Play
Stop
Pause (Press again to resume normal playback)
Displays the DVD's menu.
Displays the DVD's Title menu.
Alternates sound between the main picture and the
window picture.
Moves the location of the PIP window picture.
Cycles through the Multi-channel TV Sound (MTS) options:
Stereo, Auto-SAP, Mono.
Freezes the window picture. Press again to restore the
picture.
Changes the channel in the PIP window picture.
The PIP window picture, cycles through the video equipment
connected to your TV's video inputs: TV, VIDEO 1, VIDEO 2, VIDEO
3, VIDEO 4. This allows you to select different sources for the
PIP display.
5