•
Crash Cushion:
o Control of cracks and dents or cracks in tubes and H beams structure
o Brake bolts are tightened to cut and bend / Tube section M8 class 8.8 (4
pcs each side)
o Inspection of inner Tubes, has to be clean surface ( no mud or sand etc.. )
•
Test running
o Set up the entire machine as defined
o Try all labor movements, which are not allowed to shock. After the test it
must be properly monitored or stressed parts do not exhibit cracks or
permanent deformation.
Operation and maintenance manual Verdegro Blade
Figure 47
Page 61 of 68