Sony WEGA KV 27FS320 Operating Instructions Manual page 19

TV and Cable Box
Some cable TV systems use scrambled or encoded signals that require a cable box to view all
channels. If you subscribe to such type of service, use this connection.
1
From cable/
antenna
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
Using your TV with this connection
❏
Program your Sony remote control to operate your cable box (see page 5).
❏
To activate your remote, press
use the buttons or CH+/- buttons to change the channels. In order to do this, first
0 9
program your remote control, then use the Channel Fix feature to set your TV to channel 3
or 4
(see page 41).
12
Cable box
VIDEO AUDIO L AUDIO R
LINE
OUT
2
(FUNCTION button) to operate your cable box. Then
Rear of TV
3
1
S VIDEO
VIDEO
L
(MONO)
R