Paper Sensor - Epson TM-T88 Information Manual

Hide thumbs Also See for TM-T88:
Table of Contents

Advertisement

0 ≤ n ≤ 255
[Range]
ESC c 4 n selects whether to stop printing or not when the paper near end is detected. The paper roll
near-end sensor is enabled when either bit 0 or bit 1 is on. When a paper near-end is detected,
printing stops after printing the current line. The printer goes off-line after printing stops. The
default setting is n=0. If the paper roll near-end sensor is disabled and a paper near-end is detected,
printing does not stop. The printer does not go off-line, and the PAPER OUT LED comes on. Paper
roll end sensor is always enabled and it detects a paper end, the printer stops printing.
The paper sensor(s) used to stop printing are selected by using n as follows:
Bit
Off/On
Hex
Decimal
Off
00
0
0
On
01
1
Off
00
0
1
On
02
2
2-7
-
-
-
PRINT #1, CHR$(&H1B);"c4";CHR$(1); ←
ESC c 3 n
[Name]
Select paper sensor(s) to output paper-end signals
[Format]
ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
ESC c 3 n selects whether to output paper-end signals or not to a parallel interface. The default value
is to enable the paper roll near-end and paper roll end sensors (n=15).
When both of these sensors are selected to output signals and either one detects a paper-end, the
paper-end signal is output. When all sensors are disabled, and a paper end is detected, status is
always a paper present. The paper roll near-end sensor is enabled when either bit 0 or bit 1 or both is
on. The paper roll end sensor is enabled when either 2 or 3 or both bits is on. This command is
enabled only with a parallel interface and is ignored with a serial interface.
The paper sensor(s) used to output paper-end signals are selected by using n as follows:
Bit
Off/On
Hex
Decimal
Off
00
0
0
On
01
1
Off
00
0
1
On
04
2
1-20 Command Descriptions
Function
Paper roll near-end sensor disabled.
Paper roll near-end sensor enabled.
Paper roll near-end sensor disabled
Paper roll near-end sensor enabled.
Undefined.
Program Example
Paper roll near-end sensor enabled
ESC
c
1B
63
27
99
Function
Paper roll near-end sensor disabled.
Paper roll near-end sensor enabled.
Paper roll near-end sensor disabled
Paper roll near-end sensor enabled.
3
n
33
n
51
n
Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm-t88pTm-t85Tm-t85p

Table of Contents