Sony Trinitron WEGA KV-DZ29 Operating Instructions Manual page 27

E Setting up your TV ("Initial Setup")
When you turn on your TV for the first time, the "Начальная настройкa" ("Initial
Setup") menu will appear. You can adjust settings below using the buttons on the
remote control or TV front panel. Press V, v, B or b to select or adjust items, then
press .
1
Select the desired menu language.
2
Select "Yes" to preset the channels automatically.
To skip automatic channel presetting, select "No".
3
The "Program Sorting/Edit" menu enables
you to sort and edit the channels (see N).
4
Adjust the bars on the top and bottom of the
menu if they are slanted.
5
Adjust the upper and lower bars if they are not
equally positioned to the top and bottom of the
screen.
6
To prevent this "Initial Setup" menu from
appearing again when you turn on the TV
by pressing !, select "No".
To allow this menu to appear again, select "Yes".
• You can immediately go to the end of the "Initial Setup" menu by pressing WEGA GATE.
• Before adjusting "Picture Rotation" and "Picture V-Position", keep electrical equipment
(external speakers) away from the TV to avoid magnetic disturbance.
Select Confirm
Select Confirm
Program Sorting/Edit
PROG Label Skip
01 Off
02
Off
03
Off
04
Off
05
Off
Sorting: Edit:
Select Confirm
Select Confirm End
Select Confirm End
Select Confirm
End
End
Exit