Sony Trinitron WEGA KV-SZ252 Operating Instructions Manual page 6

E
Setting up your TV ("Initial Setup")
When you turn on your TV for the first time, the "Initial Setup" menu will
appear. You can adjust settings below using the buttons on the remote control or
TV front panel. Press V , v , B or b to select or adjust items, then press
1
Select the desired menu language.
2
Select "Yes" to preset the channels automatically.
To skip automatic channel presetting, select "No".
3
The "Program Sorting/Edit" menu enables
you to sort and edit the channels (see M).
4
Adjust the bars on the top and bottom of the
menu if they are slanted.
5
Adjust the upper and lower bars if they are not
equally positioned to the top and bottom of the
screen.
6
To prevent this "Initial Setup" menu from
appearing again when you turn on the TV by
pressing 1, select "No".
To allow this menu to appear again, select "Yes".
• You can immediately go to the end of the "Initial Setup" menu by pressing WEGA
GATE.
.
Initial Setup
First please connect
cable/ antenna
Start Auto Program now?
Yes
No
Select Confirm End
Program Sorting/Edit
PROG Label Skip
01 Off
02
Off
03
Off
04 Off
Sorting: Edit:
Select Confirm Exit
Select Confirm End
Select Confirm End
Initial Setup
Display this menu next time?
Yes
No
Select Confirm