Using The Av Label Preset Feature - Sony Trinitron KV-28FS20U Instruction Manual

Optional Equipment Optional Equipment

Using the AV Label Preset feature

Connecting equipment to the TV
This function enables you to designate a name to the optional equipment you have connected to the sockets of this TV. This name
can be up to 5 characters (letters or numbers) and will appear on screen whenever the equipment is selected for use.
OK
.
.
1. Press the MENU button on the remote control to display
the menu on the TV screen.
V v
2. Press the or buttons to select the
menu screen then press the
'PRESET' menu.
V v
3. Press the or buttons to select 'AV Label Preset' then
b
press the button to enter the 'AV LABEL PRESET'
menu.
V v
4. Press the or buttons to select the input source you
wish to name (e.g. AV2) then press the
highlight the first element of the 'LABEL' column.
V v
5. Press the or buttons to select a letter or number
(select '-' for a blank) then press the
confirm. Select the other four characters in the same
way.
6. After selecting all the characters, press the OK button.
7. Repeat steps 4 to 6 if you wish to label other input
sources.
8. Press the MENU button to remove the menu from the
TV screen.
symbol on the
b
button to enter the
b
button to
b
button to
PICTURE CONTROL
Picture Mode Personal
. . . . . . . . .
PICTURE CONTROL
Contrast
Picture Mode Personal
. . . . . . . . .
Reset Contrast
Reset
FormatFormat Wide
FormatFormat Wide
AV LABEL PRESET
INPUT LABEL
AV1 - - - - -
RGB - - - - -
AV2 - - - - -
YC2 - - - - -
AV3 - - - - -
YC3 - - - - -
AV LABEL PRESET
INPUT LABEL
AV1 - - - - -
RGB - - - - -
AV2 A - - - -
YC2 - - - - -
AV3 - - - - -
YC3 - - - - -
25