Additional Connections - Sony TRINITRON KV-27S40 Service Manual

Connecting and Installing the TV (continued)

Additional Connections

The following connections are for accessories
that will enhance your viewing options.
Connecting a DVD Player
1
Using A/V connectors, connect LINE OUT
on your DVD to VIDEO IN on your TV
(Red-AUDIO Right, White-AUDIO Left,
Yellow-VIDEO).
Note
• For the best picture quality, connect the
DVD player directly to the TV.
Connecting an audio system
For enhanced sound, connect your audio
system to your TV.
1
Using AUDIO connectors, connect AUDIO
OUT on your TV to one of the unused line
inputs (e.g. TV, AUX, TAPE 2) on your
stereo (White-AUDIO Left, Red-AUDIO
Right).
2
Set your stereo to the chosen line input
(e.g. TV, AUX, TAPE 2). Refer to page 20
of this manual for additional audio setup
instructions.
10
Connecting two VCRs for tape
editing using MONITOR OUT
• KV-27V40, 27V45, 27V65 only
MONITOR OUT gives you the ability to use a
second VCR to record a program being played
by the primary VCR or to perform tape
editing and dubbing.
1
Connect the VCR intended for playback
using the setup instructions on page 7 of
this manual.
2
Using A/V connectors, connect AUDIO
and VIDEO IN on your VCR intended for
recording to MONITOR AUDIO and
VIDEO OUT on your TV.
Connecting a camcorder
This connection is convenient for viewing a
picture directly from your camcorder.
Using A/V connectors, connect AUDIO and
VIDEO OUT on your camcorder to AUDIO
and VIDEO IN on your TV (Yellow-VIDEO,
White-AUDIO Left, Red-AUDIO Right).
Connection can also be made directly to your
A/V input located on the rear of your TV.
Note
• If you are connecting a monaural camcorder,
connect only the single white audio output
to the left input on your TV.
Disconnect all power sources before making any connections.
For optimum picture quality, use S VIDEO
instead of the yellow A/V cable. S Video
does not provide sound, your audio
connectors must still be connected.
(Rear of DVD player)
LINE OUT
AUDIO R AUDIO L VIDEO
AV outputs
1
(Rear of TV)
VIDEO IN
1 2
S VIDEO
VHF/UHF
AUDIO OUT 1
(VAR/FIX)
VIDEO
L
(MONO)
AUDIO
R
Disconnect all power sources before making any connections.
You cannot change video
inputs while editing using
MONITOR OUT.
VCR (for playback)
AUDIO R AUDIO L VIDEO
OUT
LINE
IN
OUT
1
VMC-810S/820S (not supplied) VMC-810S/820S (not supplied)
If you have an S Video equipped
camcorder, you can use an S Video
connection for optimum picture quality.
AV output
— —
11
KV-27S40 / 27S45 / 27S65 / 29SL40 / 29SL40A / 29SL40C/
29SL45 / 29SL65 / 29SL65C/ 29XL40M / 29XL40P / 29XT11A
(Rear of TV)
VIDEO IN
1 2
S VIDEO
VHF/UHF
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
AUDIO
R
S VIDEO
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VMC-810S/820S (not supplied)
RK-74A
AUDIO-L (white)
(not supplied)
AUDIO-R (red)
Line
input
2
HRD
(Rear of KV-27V65)
AUX
TO
CONVERTER
IN
OUT
VIDEO 1 VIDEO 3 MONITOR AUDIO
VHF/UHF
(VAR/FIX)
S VIDEO
VIDEO
L
VCR (for recording)
(MONO)
AUDIO
R
AUDIO R AUDIO L VIDEO
LINE
IN
2 VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
(Front of KV-27V40, 27V45, 27V65 only)
VIDEO 2 INPUT
VIDEO L(MONO)-AUDIO-R
VIDEO
L (MONO) -AUDIO-R
VIDEO 2 INPUT
VIDEO (yellow) AUDIO-R (red)
AUDIO-L (white)
VMC-810S/820S
(not supplied)
OUT
IN
11