Aneng Q1 User Manual page 10

Push once to hold the current reading on the
display; push again
operation.
Push for more than 2 seconds to enter the
②
relative mode. The product will store the present
reading as a reference for subsequent readings.
The display is zeroed, and the stored reading is
subtracted from all subsequent readings. Long-
push again to exit the relative mode.
Push this button to toggle between testing
③
modes of DCV, ACV, and NCV.
Push this button to toggle between testing
④
modes of DCmV ( ＜ 99.99mV), ACmV( ＜
99.99mV), and Temperature.
Push this button to toggle between testing
⑤
modes of Resistance, Diode/Continuity, and
Capacitance.
Push this button once to enter the manual range
mode. In manual range mode, each push
increases the range; when the highest range is
⑥
reached, the next push will lead to the lowest
range. To exit the manual range mode, push
the button for more than 2 seconds.
to continue
6
normal