Luxul PDU 2 Quick Install Manual
  1. Manuals
  2. Brands
  3. Luxul Manuals
  4. Power distribution unit
  5. PDU 2
  6. Quick install manual
Luxul PDU 2 Quick Install Manual

Luxul PDU 2 Quick Install Manual

Intelligent network pdu
Hide thumbs
Table of Contents

Advertisement

Quick Links

QUICK INSTALL GUIDE
PDU 2
Intelligent Network PDU
PDU-02
Includes:
PDU 2 2-Outlet Intelligent Network PDU
„
Mounting Kit
„
Ferrite RF Choke
„
Power Cord
„

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PDU 2 and is the answer not in the manual?

Questions and answers

Related Manuals for Luxul PDU 2

Summary of Contents for Luxul PDU 2

  • Page 1 QUICK INSTALL GUIDE PDU 2 Intelligent Network PDU PDU-02 Includes: PDU 2 2-Outlet Intelligent Network PDU „ Mounting Kit „ Ferrite RF Choke „ Power Cord „...

  • Page 2: Installation And Setup

    Clip Rack-Mounting the PDU 2 Connecting Ethernet and Power Connecting Power Use the included power cable to connect the PDU 2 to an outlet with adequate current capacity. The AC input socket is on the rear panel. Once the power...

  • Page 3: Connecting Ethernet

    Use only the included power supply cord. Connecting Ethernet Connect the PDU 2 to your network with a standard Ethernet cable. Install the provided RF choke on your Ethernet cable as closely as possible to the connector going into the PDU 2.
  • Page 4 “PDU-2-78083E,” where the last half of the name represents the last three octects of the device’s MAC address. Once you locate it, make a note of the IP address. If the PDU 2 fails to find a DHCP server the unit will default to the IP address 192.168.0.6...

  • Page 5: Rear Panel

    PDU 2 Front Panel Rear Panel The rear panel of the PDU 2 includes the power supply inlet (with cable retain- er), a reset button, a general status indicator, an Ethernet port and a grounding screw.

  • Page 6: Led Indicators

    LED Indicators The LED indicators on the PDU 2 include a general device status LED, and a power status indicator for each of the two controlled outlets. The following chart shows the LED indicators of the PDU 2 along with an explanation of the indicator’s properties:...

  • Page 7: Reset Button

    To Restore Default Settings: With the PDU 2 powered on, use a pen or stylus to press and hold the Reset button on the back panel for at least six seconds, then release the button.

  • Page 8: Year Limited Warranty

    Luxul product. © Copyright 2017 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other...

Table of Contents