Technical Data; Disposal; Meaning Of The "Wheelie Bin" Symbol - Profi Cook PC-HWS 1145 Instruction Manual

Problem Possible Cause
"E7" will appear on The water tank is
the display. You will empty.
hear 20 signal tones.
The appliance is The over temper-
despensing water ature protection is
without heating it up. enabled.

Technical Data

Model:................................................................ PC-HWS 1145
Power supply:....................................... 220 - 240 V~, 50 / 60 Hz
Power consumption: ...........................................2200 - 2600 W
Protection class: .......................................................................
Filling quantity: ........................................................max. 4 Litre
Net weight: ....................................................... approx. 2.95 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This appliance complies with all current CE directives, such
as electromagnetic compatibility and low voltage directive and
is manufactured according to the latest safety regulations.
40
PC-HWS1145_IM_new
Solution
1. Fill the water tank with cold water immediately.
2. Unlock the appliance with the "Lock" button. The appliance saved the settings
last selected. There is no option to visibly change the settings. When tapping
the illuminated buttons the settings change but no values will be indicated in
the display.
3. You may either put an empty vessel on the drip tray cover to dispense the en-
tire preset amount of water. Or you stop dispensing water manually with the
"Start / Stop" button once the desired amount of water has been dispensed.
4. The error message goes disappeared when dispensing water. The values
last set can be seen in the display.
Another option:
1. Disconnect the appliance from the power supply.
2. After filling the water tank connect the power plug with the socket again.
3. Unlock the appliance with the "Lock" button. The deafult setting will be shown
in the display.
4. Proceed as described under chapter "Operation" point 4.
1. Use the key for resetting the error message. Use this key to press the
"RESET" button on the housing.
2. Proceed as described under chapter "First use".

Meaning of the "Wheelie Bin" Symbol

You contribute to recycling and other forms of utilization of old
electric and electronic appliances.
Your municipality provides you with information about collect-
ing points.

Disposal

Take care of our environment, do not dispose of
electrical appliances via the household waste.
Dispose of obsolete or defective electrical appli-
ances via municipal collection points.
Please help to avoid potential environmental and
health impacts through improper waste disposal.
22.09.17