Table of Contents
Advertisement
3.4.3
Note on electromagnetic compatability (EMC)
The device is intended for use in electrically conductive and earthed control cabinets. Leads that are fed
into the control cabinet should be screened and the screen should be connected with the control cabinet at
the point of entry, preferably directly in the cable gland. Unscreened leads in the control cabinet (e.g. power
supply leads) should be fed via filters.
3.5
Dismantling, packaging and disposal
When dismantling the device, keep it in the original packaging for future use.
The multiplexer should eventually be disposed of in accordance with national regulations on
disposal / recycling.
The device does not contain batteries which would have to be separately disposed of.
Subject to reasonable modifications due to technical advances.
22
Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
HART Multiplexer Master KFD2-HMM-16
Copyright Pepperl+Fuchs, Printed in Germany
Installation
Advertisement
Table of Contents
