Manual Programme Preset - Sony KV-25RE10K Instruction Manual

Level 1 Level 2 Level 3 / Function

MANUAL PROGRAMME PRESET

The "Manual Programme Preset" option in the
"Set Up" menu allows you to:
a)
Preset channels or a video input source one
by one to the programme order of your
choice. To do this:
1 After selecting the "Manual Programme
Preset" option, press
Programme option highlighted press
Press or to select on which
programme number you want to preset the
channel (for VCR, select programme number
"0"). Then press .
2 The following option is only available
depending on the country you have
selected in the "Language/Country"
menu.
After selecting the System option, press
Then press or
Broadcast system (B/G for western European
countries or D/K for eastern European
countries). Then press
3 After selecting the Channel option, press
Then press or
tuning ("C" for terrestrial channels or "S" for
cable channels). Next press
the number buttons to enter directly the
channel number of the TV Broadcast or the
channel of the VCR signal. If you do not
know the channel number, press
search for it. When you have tuned the
desired channel, press OK twice to store.
Repeat all the above steps to tune and store more
channels.
b)
Label a channel using up to five characters.
To do this: Highlighting the Programme
option, press the PROGR +/- button to select
the programme number with the channel
you wish to name. When the programme you
want to name appears on the screen, select
the Label option and press
press or to select a letter, number or
"-" for a blank. Press
character. Select the other four characters in
the same way. After selecting all the
characters, press OK twice to store.
then with
.
.
to select the TV
.
to select the channel
. Then, press
or to
. Next
to confirm this
continued...
Menu System
GB
.
13