Quick Charge - Philips Norelco 6000 Series Manual

14
English

Quick charge

Charging with the power cord
Charging in the charging stand (S6810 only)
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 50 minutes.
Note: You cannot use the shaver while it is
charging.
After approx. 5 minutes of charging, the shaver
contains enough power for one shave. The
bottom light of the battery charge indicator
starts flashing white slowly when the quick
charge is finished.
1 Make sure the shaver is switched off.
2 Put the small plug in the shaver and
connect the power plug to any 100V to
240V AC outlet. Use only the power cord
provided.
The display of the shaver indicates the
product is charging.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the shaver.
Note: The shaver can also be charged with the
power cord (see 'Charging with the power
cord').
1 Make sure the shaver is switched off.